Interact With the Devnet
This guide will explain how to interact with the devnet using Kurtosis by making a simple L2 RPC test call.
This guide assumes you have a running devnet, if that's not the case, you can head to the Getting Started section.
Inspecting the Devnet
First, you will need to figure out which port Kurtosis is using for the L2 RPC. You can get a general feel for the entire network layout by running the following command.
kurtosis enclave inspect pos
where pos is the name of the enclave.
Retrieving the L2 RPC URL
Let's store the L2 RPC URL in an environment variable for use with cast.
export ETH_RPC_URL=$(kurtosis port print pos l2-el-1-bor-heimdall-validator rpc)
echo $ETH_RPC_URL
If you want to get the L1 RPC URL, you can use a similar command:
kurtosis port print pos el-1-geth-lighthouse rpc
Querying the Network
Get the latest block number using cast from the foundry toolchain.
cast block-number
Sending Transactions
The devnet automatically prefunds an admin account with address 0x74Ed6F462Ef4638dc10FFb05af285e8976Fb8DC9.
cast balance --ether 0x74Ed6F462Ef4638dc10FFb05af285e8976Fb8DC9
Let's send some transactions now!
pk="0xd40311b5a5ca5eaeb48dfba5403bde4993ece8eccf4190e98e19fcd4754260ea"
cast send --private-key "$pk" --value 0.01ether $(cast address-zero)
Let's send some load using polycli.
pk="0xd40311b5a5ca5eaeb48dfba5403bde4993ece8eccf4190e98e19fcd4754260ea"
polycli loadtest --rpc-url "$ETH_RPC_URL" --private-key "$pk" --verbosity 700 --requests 5000 --rate-limit 10 --mode t
polycli loadtest --rpc-url "$ETH_RPC_URL" --private-key "$pk" --verbosity 700 --requests 500 --rate-limit 10 --mode 2
polycli loadtest --rpc-url "$ETH_RPC_URL" --private-key "$pk" --verbosity 700 --requests 500 --rate-limit 10 --mode v3
Checking Logs
Pretty often, you will want to check the output from the service. Here is how you can grab some logs:
kurtosis service logs pos l2-el-1-bor-heimdall-validator --follow
Getting Shell Access
In other cases, if you see an error, you might want to get a shell in the service to be able to poke around.
kurtosis service shell pos l2-el-1-bor-heimdall-validator
Inspecting Genesis and Contracts Files
You might also want to check the CL and EL genesis files.
kurtosis files inspect pos l2-cl-genesis genesis.json | jq
kurtosis files inspect pos l2-el-genesis genesis.json | jq
In the same way, you might want to check the MATIC contract addresses on L1 and L2.
kurtosis files inspect pos matic-contract-addresses contractAddresses.json | jq
Clean Up the Environment
When you're done with the devnet, you can tear down the environment.
kurtosis enclave rm --force pos